Ion deodorization equipment

Ion deodorization equipment is composed of ion generator, ion transmission tube, control system, used to deodorize, remove odor air purification equipment, widely used in fresh air systems, factories, workshops, sewage stations, garbage deodorization and other places. The common ones are plasma deodorizing equipment, high-energy ion deodorizing equipment, photohydrogen ion deodorizing equipment.

The main principle of ion deodorization equipment is to produce a large number of positive and negative oxygen ions under the action of high voltage electric field, which has strong oxidation. It can oxidize and decompose methyl mertan, ammonia, hydrogen sulfide, ethers, amines and other pollution odor factors in a very short time, open the chemical bonds of organic volatile gases, generate stable and harmless small molecules such as carbon dioxide and water, so as to achieve the purpose of purifying the air.

Ion deodorization equipment is suitable for: garbage, sewage plants and other municipal facilities, as well as pharmaceutical factory, paint factory, coating factory, tannery, petrochemical, pesticide factory, pharmaceutical factory, printing factory, paper factory, feed processing plant and other industrial places.

The ion deodorization equipment and exhaust equipment shall be supplied in complete sets, and the size of the equipment shall meet the on-site installation requirements, regardless of whether specified in this technical regulation, at least the following contents shall be included:

3.1, equipped with a complete internal spray washing system (water and gas separation device) ion deodorization equipment and the corresponding equipment reinforced concrete foundation.

3.2 Odor collection closure device 3.3 odor collection pipeline system

3.3 Equipped with complete exhaust equipment (including frequency conversion speed regulating fans, motors, shock absorbers, etc.) 3.5, exhaust pipes and supports and other supporting facilities (higher than the structure (construction) next to the building and not less than 6 meters above the ground, including the reinforced concrete foundation of the exhaust pipe); In addition, two monitoring and sampling holes with a diameter of 75mm must be opened on the total air inlet pipe and exhaust pipe of the equipment, and cover plates must be installed.

3.4 Fan silencer, connecting air pipe, 15 meters cable and water supply and drainage pipe, etc. 3.7, all connection accessories, fixed parts, anchor bolts and flexible joints

3.5. Control device and corresponding sensor

3.6 Special tools and spare parts within the one-year warranty period 3.10, electrical and control system, including frequency conversion speed control cabinet, etc